Laboratory Tenter TD620
Laboratory Tenter, a flexible continuous pin chain type hot air dryer, is generally used together with a small padder/resin pressure dyeing machine for dry laboratory tests on drying, setting, resin processing baking, roll dyeing baking, and heat fixing, to obtain correct resin processing formulations, to test dyeing processing color changes and to verify the results of pharmaceutical tests. It can also be used to complete the hand sample production, to obtain the correct color sample and tissue sample.
Laboratory Tenter, Replaces conventional drying chambers to provide accurate color matching and greatly reduces sampling time. In addition, it allows instant testing of fabrics coming off the mill for timely detection of side/center color differences.
Lab tenter is an excellent tool for producing samples as it replicates exactly the desired color and finishes size. It evaluates the degree of color change and further prevents color differences during the resin finishing or drying process.
Performs dye tests, auxiliary and chemical tests, and provides conditions similar to those of a pilot plant to evaluate the effect on fastness and product quality.
Technical Parameter of Laboratory Tenter TD620
- Batch working with pin frame (length and width are adjustable) 160 ~ 360 mm
- Continuous working with endless pin chain
- The electric heating power is 19kw, temperature 20 ~ 250℃
- Moving speed 0 ~ 6 m/min
- 3 sets of air circulating fans ensure high drying and thermal fusion performance
- Equipped with cloth pressing wheel on the feeding side, and pin-up device to lead fabric to reserve box at the end
|380 V||50 Hz||19 kW|
|2500 x 900 x 1500 mm (L x W x H)|
Operation Method of Laboratory Tenter TD620
The workflow of the machine is as follows:
step1 Before starting the equipment, you must check whether the power grounding wire is reliably grounded. Then check the following:
Whether the three-phase motor rotation direction is correct. Whether the special air switch is flexible, whether the needle board fabric holder is stopped in the rear position (exit position), close the left and right, and rear side exhaust port.
step2 At first, open the power switch knob.
step3 Secondly, set the required working temperature.
step4 According to the test cloth drying, shaping time, set the holding time.
step5 Then, open the heating knob, and heaters start to be put into operation.
step6 After reaching the required temperature, then it will automatically enter the heat preservation state.
step7 Put the needle board frame with good cloth on the bracket, press the feed button, start the automatic work process, when time is up, automatically quit and call the bell.
step8 Prepare the next batch of drying.
step9 stop, the heating knob off, open the exhaust port behind and both sides of the machine, cool down to 75℃ and cut off the power of this machine. At the same time, also cut off the power switch outside the machine.
Why choose TESTEX Laboratory Tenter TD620
Strictly meet standards
All data for the laboratory tenter meet the standard parameters.
Consistency with international third-party laboratories
The test data are comparable to the test results obtained by well-known international third-party laboratories.
With the same set of samples, the same machine, after multiple tests, the results are consistent.
Whether is the same set of samples, or different machines of the same model, after multiple tests, the results are consistent.
Longer service life
TESTEX makes prototypes and then subjects them to rigorous reliability testing in a variety of environments to ensure achieve the expected service life.
User-friendly transparent warranty policy
Textile testing machines, 14 months free warranty (12 months normal warranty time + 2 months shipping time). Besides, all spare parts, have 3 months free warranty.
We provide full life-cycle support for laboratory tenter machines, so feel free to contact our service team with any questions you may have.
Welcome to TESTEX – a professional textile testing instrument supplier – laboratory tenter is on sale, contact us to get a detailed price quote.