Contact Us       Get Standards   

Standard Dry-cleaning Machine TF177

Rated 4.80 out of 5 based on 5 customer ratings
(5 customer reviews)

Standard Dry-cleaning Machine, used for physical index test of all kinds of fabrics and garments after they are washed by detergent and organic solvent and oven dried.


Standard Dry-cleaning Machine, used for physical index test of all kinds of fabrics and garments after they are washed by detergent and organic solvent and then dried by oven.

The only one model that totally complied with all major Standards, to truly simulate the standard dry-cleaning condition.


  • 16 bit controller, Digital display and program-controlled, Program-controlled Air pressure valve, Multi failure protection and Alarm.
  • 5 Built-in, fully-automatic test programs, 1 programmable test program.
  • Total sealed pipeline system, Liquid cycle filter design, drying system uses active carbon filter.
  • Working parts are made of stainless steel.
  • Individual liquid adding tank, automatically measure and add liquid.


  • Rotating Cage           diameter 650mm  x length 320mm
  • Capacity / Dried Weight 6 kg
  • Washing speed  45 r/min
  • Dewatering speed  450 r /min
  • Drying time               4 ~ 60min
  • drying temperature  80 +/-2℃
  • Noise ≤61dB (A)
  • Capacity of distillation box    50L


800 kg


220/110 V50/60 Hz7.5 KW


Length:1400 mmWidth:1000 mmHeight:2000 mm


ISO 3175.1 – 1ISO 3175.1 – 2AATCC 158FZ 80007.3-1999
GB/T 11401.1-1989FZ/T 01083-2000GB/T 19981.2

Leave an inquiry for instruments, methods or any information.

We usually respond within 12 hours, or faster.

The Purpose and Scope of Fabric Dimension Variance Rate

Standard Dry-cleaning Tester meets a variety of dry cleaning standards that define the dry cleaning process for commercial dry cleaners. The method of measuring the dimensional stability of the fabric and garment after dry cleaning with tetrachloroethylene, it can not only measure the dimensional stability of a dry cleaning but also measure the dimensional stability after repeated cycle dry cleaning (usually not more than 5 times).

Test Principle of Fabric Dimension Change

Print and measure the length of the moistened fabric or garment, dry clean and post-treat the sample. Then humidify a measure the size change rate of the sample.

Test Sample Preparation

The garments were tested as they were. The shear size of the fabric is not less than 500mm*500mm, and the edges are wrapped with polyester yarn to prevent edge stripping. Elastic cylindrical knitted fabrics should be carefully cut along the lines so that they are not damaged. Mark and measure the sample before testing.

Place the samples separately on a flat and smooth horizontal plane at (21±1)℃ and (65±2)% relative humidity for at least 24 hours. When printing marks, place the sample tensionless flat on a flat, smooth plane, avoiding creases or creases. Print three sets of marks in length and width direction, the marking size is at least 250 mm.

Test Procedure

1 Put the moisturized samples and the washing products into the dry cleaning machine, add the mixture of Span80 and tetrachloroethylene, the content of Span80 in the perchloroethylene is 1g/L, and calculate the amount of the solvent according to the addition of 0.65L solvent per kilogram sample and the washing cloth. Keep the solvent temperature at (30±3)℃ during dry cleaning.

2 Calculate according to the volume, prepare the emulsion. Turn off the filter path, start the standard dry-cleaning equipment and slowly add a certain amount of emulsion to dry cleaner.

3 After starting the instrument, keep the instrument running for 15 minutes. No filter path is used during the operation of the instrument except when the solvent is added in the first step.

4 Remove the solvent and centrifuge for 2 minutes to remove the solvent of the sample. Then add a certain proportion of tetrachloroethylene to solvent rinsing for 5 minutes, drainage and dehydration for 3 minutes.

5 Drying the sample, the outlet temperature is not more than 60℃, and the inlet temperature is not more than 80℃. After drying, blow the sample with ambient air for 3-5 minutes.

6 Take out the sample, treat the sample with an appropriate method, and measure the change rate of fabric size.

What is the size stability of the fabric after dry cleaning? Through this article, I think you might have got some information. If you want to know more, please contact us. As a professional supplier of textile instruments, we are committed to continually improve the user experience, TESTEX Textile Testing Equipment is a reliable choice for testing textile quality.

Leave an inquiry for instruments, methods or any information.

We usually respond within 12 hours, or faster.

5 reviews for Standard Dry-cleaning Machine TF177

  1. Rated 5 out of 5

    Belinda Wells

    Still going strong after one year. Recommend.

  2. Rated 5 out of 5

    Quintion George

    Everything is good.If the delivery time can be shorter, it would be better.

  3. Rated 4 out of 5

    Franklin Noah

    The machine is ok.

  4. Rated 5 out of 5

    Cornell Blake

    Goods came this week.Fit the description.Recommend.

  5. Rated 5 out of 5

    Frederica Hodge


  6. Rated 5 out of 5

    Milton Z.

    A very good thing. high quality выжигательный. thank you seller.

Add a review

Your email address will not be published.