Schopper Abrasion Tester
     Contact Us       Get Standards   

Browse by Categories

Schopper Abrasion Tester TF228

Rated 4.60 out of 5 based on 5 customer ratings
(5 customer reviews)

Schopper Abrasion Tester, to evaluate the abrasion resistance of automotive trim materials and textile fabrics under tension using a rotary abrasion test.

Schopper Abrasion Tester, to evaluate the abrasion resistance of automotive trim materials and textile fabrics under tension using a rotary abrasion test.
Put the sample in plane with abrasion block, the test is performed by exerting a rotating action of friction, with friction area of 50 cm2.
The Schopper Abrasion Tester can be used to determine the appearance changes of samples after the friction or wear test.

The friction head can be replaced to meet the requirements of different testing standards; The high sensitivity of the balance bar ensures the error of the sample test very low, equipped with special sample mounting rack to conveniently mount samples.

Specifications

  • Test area                     50 cm2
  • Shift direction           automatically after 100 cycles of rotation
  • Obtuse cone               opening is 166 degrees
  • Rotation speed          75 rpm

Power

220 /110 V50/60 Hz

Weight

80 Kg

Dimensions

460 x 560 x 510mm (L x W x H)

Standards

DIN 53863.2GME 60345GMW 3283VW/Audi Zentral - Norm PV 3907
PV 3908

Leave an inquiry for instruments, methods or any information.

We usually respond within 12 hours, or faster.

The Use of Schopper Abrasion Tester

Schopper abrasion tester tests the abrasion resistance to the surface of the fabric under some pressure in rotating abrasion way, which is mainly used in the material of automotive interiors.

The Structural Specification of Schopper Abrasion Tester

Schopper abrasion tester includes a chuck and a clamping device for supporting the specimen, a platen and a moving device for fixing the friction material. The clamping device is a ring clamp and includes two things, an outer ring is used to clamp the specimen and a rotatable collet is used to adjust the height of the conical locating surface of a specimen. Pressing plate includes two securing plates and a clamping screw, both of them are used to clamp the sandpaper as abrasion.

The Procedure of Specification of Schopper Abrasion Tester

1. Before the test, we should set up parameter like total friction times and each unidirectional friction time.
2. Through the leveling device, we adjust the sandpaper holder to set the pressure for the specimen is zero.
3. We cut 5 circle samples, which covers an area of 100cm² and remove the loose thread from the edge of the sample.
4. Then, we adjust the temperature and humidity of the specimen.
5. According to the weight per unit area of the specimen, we add corresponding weights and turn on the tester.

Schopper Abrasion Tester is stable, durable and low-noise to measure the abrasion resistance of the fabric. But it should be maintained at regular intervals to make sure its stable state and accurate data.

Leave an inquiry for instruments, methods or any information.

We usually respond within 12 hours, or faster.

5 reviews for Schopper Abrasion Tester TF228

  1. Rated 5 out of 5

    Lesley Hugh

    The schopper abrasion tester exactly what i looking for.

  2. Rated 4 out of 5

    Oliver Jones

    Hope you have a detailed method on website, but thanks for teaching patiently.

    • testextextile

      Thank you for your advice, we will improve it as soon as possible.

  3. Rated 5 out of 5

    Beau Tennyson

    La máquina tiene una apariencia hermosa y buen rendimiento.

  4. Rated 4 out of 5

    Gail Brown

    If the delivery time can be shortened, it would be better.

  5. Rated 5 out of 5

    Roderick Wood

    Very clear and easy to use!

Add a review

Your email address will not be published.

Menu